JINQIU MACHINE TOOL COMPANY
WUXI JINQIU MACHINERY CO.,LTD JINQIU MACHINERY specializing in the production of CNC hydraulic press brake machine, hydraulic shearing machine& sheet V grooving machine. WUXI JINQIU Machinery CO.,LTD
Add to Cart
Big Diameter Light Pole Welding Machine Gantry Type Shut Welding
Information:
The Machine Is The Special Equipment To Make High Poles And Electric Power Pole.
It Combined By Walking Motor To Drive Commissure Points To Seam And Under
The Manual Spot Welding, It Has High Efficiency.
The machine adopt submerged arc welding, the welding power is from Shangha iwelding
company, the welding is continuous and beautiful, strong penetration, forming one time ,
high efficiency. The speed is 1-3m/min. is the three time to gas welding. It’s the best
machine with fastest welding speed, good effect and lowest price.
introduction:
Power pole / High mast pole normally is assembed with 2 ~4pcs plate. production
procedure is spot welding to assemble into pole shape. and the Gantry Type Welding
will use submerged welder to weld seam for times. for so big pole, welding seam shall
penetrate completely through the plate thickness to get enough strength. and welding
outlook shall be nice, because the big pole normally used for city or surbub area.
Technical data:
| Rail distance | 3000mm(or 4000mm) |
| Rail length | 15000mm or according requirments |
| High mast Pole diameter | 300-2000mm |
| High mast pole length | 12000mm |
| Welding wire diameter | 3.2-5mm |
| Welding speed | 250-1200mm/min(bi-side driving, variable-frequency stepless speed control) The AC driver : Telemecanique |
| power | Main motor power:10KW (not include weder) |
| Profile dimension | 2830×4450×3695mm |
Configuration:
travel driving motor :YDS100-4 low speed motor 1 set
welding lifting choose SCWS-08-1.1W deceleration machine 1 set
flux recovery fitting 1 set, powder bucket 1 set, suction 1 piece, sucker 1×5m
submerged arc welding machine 1 set
power cord 3×16m㎡,60m
arc guidance 1 sets(including welding gun)
cable movement pulley
electrical apparatus box 1 set control box 1 set
Technical documents:
Whole machine foundation drawing
machine instructions (electrical appliance diagrams,
line hanger
drawing, V frame drawing)
packing list
Parts supplied by buyer:
24Kg track40m
Make base according to supplied information
Gliding wire frame
welding V frame or roller frame
lubrication for deceleration machine (machine oil 20#)
Machine photo:
